| |
Riser attachment
Scope rail and safety
Assembled and ready for the test
|
|
Assembly
The QuadAvi is similar to the RevolutionAVi (that
we reviewed here), in fact it features a
similarly shaped front end (riser+limbs) but
differently from the revolution it does not have
a quick detach system. The front end must in
fact be installed and fastened to the
stock-barrel. The operation is quite simple, you
jut need to pay attention and slide the cables
into the barrel slot pushing down until the
riser mates with the barrel. Two metal inserts
molded into the barrel will help you centering
the front assembly onto the barrel as well as
insure a perfect alignment. That’s simply it,
fasten the Allen screw with the supplied wrench
and the job is done.
You will then need to position the scope. The
QuadAvi has a rather long scope rail onto the
top that is screwed onto the trigger box, the
length of the rail will let you chose the
correct scope position to allow the correct eye
relief as well as to accommodate for your best
shooting position. Pease note that as with any
Barnett crossbow the scope rail is the small
version (7/8"
Weaver) .
|
|
|
