|
Assembly
The Barnett Wildcat C5
is shipped in a heavy cardboard box divided in
two sections: riser+limbs and stock, therefore
assembly is pretty straightforward. I recommend
to lubricating the cables and string prior to
assembly as the stock is rather wide in the
cable area and once the crossbow is mounted the
cable portion that contacts the stock (with the
interposition of a self lubricant strip) is
difficult to reach.
Get a firm grip on the stock upside down and
insert the cables into the cable slot, there is
no cable saver as a plain strip of low friction
material is already applied into the cable slot
to prevent cable wear.
Pull the riser assembly until the centering
pins on the stock mate with the riser and use
the supplied Allen screw to hold the two
sections together.
Now you can mount the peep and pin sight. The
pins are first mounted on the bridge (heavy
metal part) that goes on the top of the riser,
held in place by two screws. The peep sight is a
plastic piece that slides into the weaver rail
(also plastic) on top of the trigger box.
|
